If your product won't turn on despite charging, or has app/BT/remote connectivity issues, travel lock might be active.

To activate or deactivate the travel lock on your product, press (+) and (-) on the five button remote or (↑) and (↓) on the four remote at the same time for 2 to 5 seconds or until toy pulses.

For the five button remote:

1. Press (+) and (-) on the remote at the same time for 2 to 5 seconds until it pulses. Your device will ‘lock’.
2. Press (+) and (-) On the remote at the same time for 2 to 5 seconds your product will pulse and your device will “unlock” or simply connect the charger to the Toy this will deactivate the travel lock.

For the four button remote:

3. Press (↑) and (↓) on the remote at the same time for 2 to 5 seconds until it pulses. Your device will ‘lock’.
4. Press (↑) and (↓) On the remote at the same time for 2 to 5 seconds your product will pulse and your device will “unlock” or simply connect the charger to the Toy this will deactivate the travel lock.

This should resolve the issue. If you continue to experience issues and for further assistance feel free to reach out and share a short video following the steps above mention.

If your product is experiencing irregular vibrations this could solve your issue:

The device has a Toggle button which can activate the motor in the External arm or the motor in the Internal arm independently or simultaneously and a special built-in app feature allows each motor to be controlled separately through app. If you notice one of the motors is not working or working with low intensity:

1. Connect the Toy with remote and then with We-connect app
2. When a toy is paired to the we-connect app, Control screen for the toy will appear on the screen
3. On this screen you can adjust the intensity of both motors

By following these steps, you should be able to resolve most common issues with your product. If the problem persists, take a moment to ensure each step was followed correctly. For further assistance feel free to reach out and share a short video following the steps above mention.

If your product has a short runtime, app problems, or Bluetooth/remote connectivity issues, it might be in a power-saving mode or not discoverable.

1. The device is completely off to save power with minimal battery consumption. User can modify the sleep time which takes the device to switch to this state if the device is left unused and feature exists (Bluetooth products).
2. The device is not discoverable and will need to be paired with the remote or the App. See "How do I connect to the App"
3. The device can go out of sleep mode if any button is pressed or if the charger is connected.

By following these steps, you can ensure your product is functioning correctly and efficiently. If you continue to experience issues and for further assistance feel free to reach out and share a short video following the steps above mention.